WATER TESTING LABORATORY


Water testing for Drinking Purpose
Standard Water Analysis Package
(Chemical + Microbiological= 13 Tests)
Chemical Microbiology
  • pH
  • Turbidity
  • T. Alkalinity
  • T.Hardness
  • Chlorides
  • Total Dissolved Solids
  • Iron
  • Sulphate ( SO4)
  • Magnesium
  • Calcium
  • Conductivity
  • Total coliform
  • E-coli
   
   
Std.Sewage Analysis package
  • Ph
  • TDS (Total Dissolved Solids)
  • TSS(Total Suspended Solids)
  • Chloride
  • Sulphate
  • Oil & Grease
  • COD(Chemical Oxygen Demand)
  • BOD(Biological Oxygen Demand )
   
Std.Effluent Analysis Package
  • Ph
  • TDS (Total Dissolved Solids)
  • TSS(Total Suspended Solids)
  • Chloride
  • Sulphate
  • Oil & Grease
  • COD(Chemical Oxygen Demand)
  • BOD(Biological Oxygen Demand )
   
Other Services Includes
  • Std.Swimming water Analysis Package
  • Std .Water analysis for construction purpose
  • Treatability Studies
   
 
TREATABILITY STUDIES

Without knowing the Exact treatment & Chemical composition of Effluent It's very difficult to process large volume of effluent (at practical level) to achieve the desired results as per Rules / Limits.



AQUA Laboratories - Effluent Treatability Studies : can be useful for water and waste water. These studies are very important for the selection of treatment process. These studies involve various methods with different treatment chemicals to determine the most appropriate method of treatment.


It is small scale Laboratory testing, that can give us valuable information about treatment to perform in the field. Its relatively very cost-effective and can prevent full-scale cost application of technologies.



Performing a treatability studies during the early stages of designing plant is important to :
1. Determine the specific technologies required for a system to meet remedial and compliance goals.
2. Cost-effectiveness while scaling up to the desired scale.
3. In addition treatability studies also help in analyse the sludge Volume,Settling rate and various design data.


That's why its called as the "The surest way to save a Lot"

Initially, we are processing the Effluent for following parameters to check the concentration of impurities present in it, for :
• pH
• TDS (Total Dissolved Solids)
• TSS (Total Suspended Solids)
• Chlorides
• Sulphates
• COD (Chemical Oxygen Demand)
• BOD (Biochemical Oxygen Demand)
• O & G (Oil & Grease )
• Any other specific parameter as per need


Then depend on chemical composition of Effluent we are suggesting the different methods & processing the sample (small volume ) in the laboratory.The Output sample from this process again checking for the above mentioned parameters to check success rate of this process.

The minimum quantity of sample required shall be 5 Lit and detail composition of Effluent .

 
Address

Address : BR-1, 401 to 405, Wing - B, Inox Multiplex Building, Jai Ganesh Vision, Akurdi Pune 411035, Maharashtra, India.


Tel. No. : +91 20 - 272 41501
Mobile No. : +91 86696 64604 / 99231 81974